> hi,after a update of vers 4..;is it possible to have one bar in loop
> to work on without hear the other bars in the track..i find a loop
> fonction for two bars but nor for only one..best regards
In bar edit, hold FUNC then press the bar you want to loop *twice* - i.e.
set the same bar as loop start and end.
That bar should be green, any others in the pattern amber.
From play mode, you can hold any track on the current bar - just hold UPPER
MODE, then toggle bar hold on each track using the track keys.
While UPPER MODE is held, green indicates normal, amber a held track.
Any holds are cleared when you arm the track or change part.
Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com