Analogue-sequencer

Folks,

I've found a UK based PCB fab that has quoted me a great price for 
the second run of boards, so I'll be confirming the order with them 
tomorrow.
This means round two should start shipping to yourselves in early to 
mid February.

I'm also going to speak to a supplier of Hammond enclosures about a 
bulk order.
If you'd be interested in one of either of the two types of Hammond 
case to go with your PCBs (or previous PCB customers), let me know 
what you're after and I can see about adding it to my order.
The two types of case are the shallower, 17 inch wide one that Chiel 
used:
http://www.oozi.demon.nl/P3index.html

Or the deeper, narrower type Paul Maddox uses:
http://www.modulus.synth.net/synthdiy/2003/p3_chameleon.jpg

Both types should be available in black or white.
Cases supplied by myself will *not* have any holes machined.
That can either be done by the builder, Steve Thomas, or Schaeffer 
Apparatebau.

Cheers,
Colin f

All,

> Or the deeper, narrower type Paul Maddox uses:
> http://www.modulus.synth.net/synthdiy/2003/p3_chameleon.jpg

another picture is here ;-
http://www.modulus.synth.net/pics/p3_assembled.jpg

> Both types should be available in black or white.

I should point out, that if you order the BLACK case (same as mine) you
won't get wooden ends.
you'll get blue steel ends.
If you order the Cream colour case you can get it with (or without) wooden
ends.

Paul

> I should point out, that if you order the BLACK case (same as 
> mine) you
> won't get wooden ends.
> you'll get blue steel ends.
> If you order the Cream colour case you can get it with (or 
> without) wooden
> ends.

Ah yes, that's right.
But if you're particularly keen on black with wooden-end cheeks, you can
buy one of each, and graft the wooden ends on the black case.
Like this:
http://photos.groups.yahoo.com/group/analogue-sequencer/vwp?.dir=/&.dnm=
Cikira%27s_P3_by_PMaddox.JPG.jpg&.src=gr&.view=t&.hires=t
(...watch the word wrap)

Cheers,
Colin f

Colin,

> http://photos.groups.yahoo.com/group/analogue-sequencer/vwp?.dir=/&.dnm=
> Cikira%27s_P3_by_PMaddox.JPG.jpg&.src=gr&.view=t&.hires=t
> (...watch the word wrap)

you really must get yourself a gallery up...
Also, check out 'www.tinyurl.com'

Paul

On Mon, 26 Jan 2004, colinfraser_com wrote:

> This means round two should start shipping to yourselves in early to
> mid February.

awesome!!

> I'm also going to speak to a supplier of Hammond enclosures about a
> bulk order.
> If you'd be interested in one of either of the two types of Hammond
> case to go with your PCBs (or previous PCB customers), let me know
> what you're after and I can see about adding it to my order.
> The two types of case are the shallower, 17 inch wide one that Chiel
> used:
> http://www.oozi.demon.nl/P3index.html

i am want a black version of one of these... but since i am in the US,
could i get it sent to Steve for drilling? i will reimburse you for any
shipping cost (i don't know if he lives on the isle of man or next door to
you, heh).

i'm all super excited...! i've got my studio all set up awaiting the P3...
when do you need full payment by?

thanks,
fred.

bleep.
out.

---
http://leichenfeld.iuma.com
http://thirdwavecollective.com

whoops, that was supposed to be private... apologies...

bleep.
out.

---
http://leichenfeld.iuma.com
http://thirdwavecollective.com

colinfraser_com (02:31 pm 1/26/2004) wrote:

 >Or the deeper, narrower type Paul Maddox uses:
 >http://www.modulus.synth.net/synthdiy/2003/p3_chameleon.jpg

Put me down for one of these!

And please put in a vote for having someone machine the holes for me 'cause 
I'm lazy and don't trust myself to do a good job. :)


Mark

...update


Mark Pulver (11:15 pm 1/26/2004) wrote:

 >colinfraser_com (02:31 pm 1/26/2004) wrote:
 >
 > >Or the deeper, narrower type Paul Maddox uses:
 > >http://www.modulus.synth.net/synthdiy/2003/p3_chameleon.jpg
 >
 >Put me down for one of these!

Paul Maddox wrote:

 >>If you order the Cream colour case you can get it with (or
 >>without) wooden ends.

So, I'd like to have one in cream, with wooden ends.


 >And please put in a vote for having someone machine the holes for me 'cause
 >I'm lazy and don't trust myself to do a good job. :)

And that part still goes. :)

on 27-01-2004 08:16, Mark Pulver at mark@midiwall.com wrote:

Heya Mark!

You're everywhere on the net, aren't you :-)))

Oh and folks, I *finally* gonna see/touch/use my P3 in real life today!

Poor Robert...

I specially did set up the Andromeda last night as first synth in the new
house to be able to use the P3 :-))))

Poor neighbours...

Boele

> 
> ...update
> 
> 
> Mark Pulver (11:15 pm 1/26/2004) wrote:
> 
>> colinfraser_com (02:31 pm 1/26/2004) wrote:
>> 
>>> Or the deeper, narrower type Paul Maddox uses:
>>> http://www.modulus.synth.net/synthdiy/2003/p3_chameleon.jpg
>> 
>> Put me down for one of these!
> 
> Paul Maddox wrote:
> 
>>> If you order the Cream colour case you can get it with (or
>>> without) wooden ends.
> 
> So, I'd like to have one in cream, with wooden ends.
> 
> 
>> And please put in a vote for having someone machine the holes for me 'cause
>> I'm lazy and don't trust myself to do a good job. :)
> 
> And that part still goes. :)
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/analogue-sequencer/
> 
> To unsubscribe from this group, send an email to:
> analogue-sequencer-unsubscribe@yahoogroups.com
> 
> Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
> 
>