Analogue systems

Many thanks. I've used the TimewArp2600 emulator, and this seems to 
match - the main surprise was the use of mults (semi-modulars tend to 
hide a lot of this stuff, of course).

--- In analogue_systems@yahoogroups.com, wayne greenhaw 
<waynegreenhaw@...> wrote:
>
> right now i am looking at my modular and i am running 3 vco,s from 
my cv buffer they are then running out to the mixer module which then 
goes to a filter then to a mult. which splits to two vca,s one 
envelope is driveing both vca,s then i use the other envelope to 
drive the filter cv input this is a pretty basic patch but i do 
remember when i first started with the modular looking at it and 
thinking ..huh.!!! and to be honest i think as they grow you always 
will thats half the fun ...you might try to download an arp 2600 
manual 
>      anyways best of luck 
>  
>         wayne
> 
> --- On Mon, 9/15/08, madrayken <dene.carter@...> wrote:
> 
> From: madrayken <dene.carter@...>
> Subject: [analogue_systems] Basic patching 101
> To: analogue_systems@yahoogroups.com
> Date: Monday, September 15, 2008, 4:02 PM
> 
> 
> 
> 
> 
> 
> So, I'm looking to buy a System 3, swapping the 120 for a third 95.
> I'm peeking at the eurorack modular planner website to get an idea 
of 
> what I'm buying:
> (http://mega. modularplanner. co.uk/standard. html) and trying to 
figure 
> 
> Since I've never owned a modular before, I might need some help. 
I've 
> already sent enough annoying mails to Analog Systems, so I thought 
I 
> might ask some annoying questions here instead. Many thanks to any 
of 
> you who can help a noob with stupid questions:
> 
> 1) With 3 VCOs, do you *need* to use a multiple to get a single 
note 
> to play on three VCOs? I presume so, and assume this is a good use 
of 
> the ring-mod mult.
> 2) Are the two CV Outs from the RS140 so you can run in duophonic 
> mode, or are they merely echoes of each other, and designed for 
> people with only 2 VCOs?
> 3) If the EG is triggered from the RS140, why is there a separate 
> Gate input, and what's the 'normal' patching for this? 
> 4) Do you use the signal mixer to mix the output from the EGs with 
> the 3 VCO outputs? 
> 5) Anyone tried using stackable plugs on their patch cables? Is 
this 
> a reasonable alternative to using Multiples? 
> 
> I know it's quite a lot of questions, but I can't think of a better 
> way of ensuring I get exactly what I need.
> 
> Again, many thanks to anyone who can help.
> 
> Dene
> 
>  
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
>       
> 
> [Non-text portions of this message have been removed]
>