Analogue systems

Thanks, Peter.  That looks like exactly what I need.  

I have several slightly modified Doepfer portable cases, and in one 
of them I have four RS-95s, which Bob Williams says draw 60ma each.  
So, I haven't been able to arrange modules the way I want due to 
current considerations.  The HAA15-0.8-A+ at .8 amps or the CP-131-
A+ at 1.1 amp looks like it should solve this problem.

Which power supply are you using in your giant system?  I'm guessing 
you must be running about 4 or 5 amps on that puppy. What are the 
dimensions of your power supply?  

--- In analogue_systems@yahoogroups.com, Peter Grenader <peter@b...> 
wrote:
> Condors - they're available through Mouser.com and quite 
excellent.  The
> shunt protection is so good you practically don't need a fuse (but 
use one
> anyway!!!).
> 
> But - i'm not quite sure what Bob meant by this because outside of 
the
> transformer type, the Doepfer and A Sys PSUs are very similar.  
The D uses
> fixed regulators, the A Sys uses variable for the +/-12.  That's 
about it.
> 
> I've used Doepfer PSUs to power booth at the same time without any 
problems.
> I am actually currently using a Doe supply, with a self made 5 volt
> regulator, to power my RS300 right now.
> 
> In any event, for the same $$ as a Doepfer, you can purchase a 
Condor - and
> those supplies are the real deal.  This is what I'm using for my 
main system
> and I couldn't be more pleased.  highly recommended.
> 
> hope this helps,
> 
> Peter
> 
> 
> 
> 
> shm1400 wrote:
> 
> > Since you are discussing power supplies, and Bob Williams has 
just
> > warned us again about those wimpy Doepfer power supplies, can
> > anybody recomend a good power supply for a system combining AS 
and
> > Doepfer modules?  (AS won't sell power supplies separately)  Any
> > help would be appreciated.
> > 
> > 
> > --- In analogue_systems@yahoogroups.com, "terrymcfrench"
> > <terrymcfrench@y...> wrote:
> >> Hi,
> >> 
> >> Does anyone have the pin setup for AS modules?  I have an 
american
> >> PSU (4 pin) but I'd like to get some AS modules.  Doepfer has
> > their 
> >> pin setup on their website so you can figure out what you'd need
> > for 
> >> the conversion, but so far I haven't been able to find that info
> > on 
> >> the Analog Systems site.
> >> I'd appreciate any help.
> >> Thanks
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > analogue_systems-unsubscribe@yahoogroups.com
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/
> > 
> >