Analogue systems

The Doe holes are messed up in comparison to the Analogue Systems equipment.
I believe you can get Doepfer rails that will just slide in there, but then
you'll have problems with sticking the A Sys gear in that same rack. So it's
either one or t'nother..

That covers the physical compatibility...

The PSU requirements are the same between the two (+/- 12, sometimes +5),
but we warned:  using a Deopfer PSU for A. Sys gear (and vise versa) will
void your warranties.  Doepfer and Bob do not use the same connectors, nor
the same pin orientation (what voltage goes where on those connectors) and
there have been too many miswires when people attempted to make mating
cables.  Frankly,  I don't blame either of them for taking this position.

So, there are risks involved with this.

I have heard Bob is working on a PSU which will come with Doepfer
terminations along with his own.

A far as the two working together once they are all powered up and mounted,
they sing like chorus of birdies - no problems there.

hope this helps.

Peter 



hosawa2003 wrote:

> Has anyone fit Doepfer modules into the RS 15?  If so, are there any
> problems that I should be aware of (i.e., fit compatiblity, power
> supply, etc.).  Thanks for your help.  Howard
> 
> 
> 
> 
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>