Analogue systems

Well I have four of them and I don't want any of them near the power
supply. So I don't think that's an option. However, can you please
inform me theoretically as to how the signal could be passing from one
module to another without patch cables.

Thanks

--- In analogue_systems@yahoogroups.com, alex banks
<alexander.banks@...> wrote:
>
> Try moving the VCOs apart?
> 
> 
> On 15 Aug 2007, at 14:38, TacocaT wrote:
> 
> > Actually I have not yet installed my VCA. If I plug my headphones
> >  directly into the output of one VCO I can faintly hear the pitch of
> >  the second VCO if I, say, do a frequency sweep with the POT of the
> >  second VCO. What would be allowing the signal from the second VCO to
> >  leak into the output of the first VCO? I am not using ANY patches for
> >  this.
> >
> >  thanks
> >
> >  --- In analogue_systems@yahoogroups.com, "monroeeskew"
> >  <monroe.eskew@> wrote:
> >  >
> >  > That is strange. The modules are independent and don't pass signals
> >  > through the power supply. Is the one VCO still connected to a
VCA or
> >  > mixer while you do this? Perhaps the VCA/mixer is not completely
> >  > attenuating when it should be, so you may need to adjust a trimpot
> >  on it.
> >  >
> >  > One thing I have noticed is that no matter how much I adjust my
ASys
> >  > VCA or the volume CV on my keyboard, the signals cannot be 100%
> >  > attenuated and can still be heard very faintly if I turn up my 
> > speaker
> >  > loud enough. I can tolerate this though.
> >  >
> >  > --- In analogue_systems@yahoogroups.com, "TacocaT" <zpardos@>
wrote:
> >  > >
> >  > > Hello,
> >  > >
> >  > > I just recieved my rs15 case and I put a couple of doepfer style 
> > VCOs
> >  > > into th case and I can hear one VCO's output (faintly)
through the
> >  > > other's output (no patches). This shouldn't be happening. Does it
> >  > > happen for anyone else? Is there also crosstalk when using the 
> > ASys
> >  > > power connectors?
> >  > >
> >  > > I wonder if the doepfer racks have this problem at all.
> >  > >
> >  >
> >
> >  
> >   
> 
> [Non-text portions of this message have been removed]
>