Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
> I had another look at the preset. There is a lot of stuff at the eand
> that will set a lot of presets to a blank preset.
> 
> $preset
>   .name '                        '
>   .snapshot off
>   .request off
>   .egroups 4
>   .fkeys on
>   .lock off
>   .init
> $store 24
> $preset
>   .name '                        '
>   .snapshot off
>   .request off
>   .egroups 4
>   .fkeys on
>   .lock off
>   .init
> $store 25
> etc...
> I'm not sure how it happened, but perhaps toorglick (or Mark can have
> a look at it looks like it was generated in the BC Manager).

Haha! Yes, BC Manager only saves complete sets of presets (1-32) to a
file, to avoid any confusion that might occur when you OPEN a preset
file that leaves out certain presets: you could then end up with a
very confusing mix of presets that you were already editing and the
newly loaded ones.

The BC Manager manual (section 7 under "File") explains this point in
relation to Behringer's own syx preset files.

If you want to manually mix presets from different files,
you can simply create one BCF/BCR controller for each file, then copy
and paste.

Mark (aka The Culprit).