Bc2000 (for the BCF2000 & BCR2000)

My pseudo blog continues -
Ok from pg 28 BC MIDI Implementation.pdf here located in Documents
section here.
"The table below contains the factory defaults for the global
settings. For convenience, it also indicates
the push encoders via which you can edit the settings manually on the
BCF/BCR in Global Setup mode
(accessed via EDIT + STORE)."
TransmissionInterval = push encoder 8.
So it can be changed manually.  Perhaps that is enough.
I will notice that something is not right then just change it with
that knob.  
Answered my own question, I suppose.  Sorry to waste the bandwidth,
however, someone might want to know my foolishness.
Cheers.
--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> I seem stuck here, .txinterval 2 is awesome for mackie emulation,
> but sucks for vfx editing, errors out all the time it likes
> .txinterval of 100 but his is way to sluggish for Mackie emulation!
> 
> Is there any way to have .txinterval be a $preset var instead of
> $global or is there a way to change the $global param with each preset
> change.
> Any other solution, besides buying another bcr2000!
> 
> Thanks
> Kip
>