Bc2000 (for the BCF2000 & BCR2000)

I know that the (14 Bit) ones are the same as the regular ones in every 
respect except that the 14 bit ones operate at a higher resolution. 
However, not all software/equipment accept the 14 bit ones, so you have to 
read or experiment to find out which one to use


----- Original Message ----- 
From: "kmxe" <kmxeproductions@...>
To: <bc2000@yahoogroups.com>
Sent: Thursday, March 23, 2006 5:11 AM
Subject: [bc2000] 2 q's re: BCR CTRL Mode in BC Edit Program & movings knobs 
cause jumps in value


> There is a selection between
>
> Absolute
> Relative 1
> Relative 2
> Relative 3
> Absolute 1 (14 Bit)
> Relative 1 (14 Bit)
> Relative 2 (14 Bit)
> Relative 3 (14 Bit)
>
> What do these mean/do? i've tried each of them with the cell volume
> of Battery 2, and besides Absolute, all of the others either moves
> the fader erratically (and not in a linear fashion) or doesnt move
> it at all.
>
> Also, when i move the knobs, the values on whatever i tie them to
> increase/decrease in jumps. What i mean is, if i tie a knob to the
> same volume fader as above, it might be 0db, then moving the knob
> very slightly might jump the volume to 0.3db, is there anyway to set
> it up so it moves the value in proper increments???
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.2.6/287 - Release Date: 3/21/2006
>
>