Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "carbonbase23" <carbonbase23@...> wrote:
> I have this one preset that I use (probably modified from a factory
> preset) in which the both footswitch LED's are always lit... (sw1 sw2)
> 
> This isn't really a problem other than the fact that I don't know why
> they are lit... I can't seem to find the command in the script using
> the PC BCSeditor or anything to tell me what is going on there... 

The BCR's SW1 and SW2 are programmed via buttons 61 and 62, so you
should see definitions for those buttons in the script.

(You might also look at the ".footsw" setting under "$global", but I
don't think this bears on your situation directly.)

Hope this helps a bit,
Mark.