Bc2000 (for the BCF2000 & BCR2000)

Hi Mark,

Thanks very much for the information. I have upgraded to 1.10 without
problems.

> By the way: your unit must be pretty old indeed! I bought mine about 2
> years ago, and it already had 1.10, and at the Behringer website even
> at that time only 1.07 and 1.10 were available.

I got my BCR from some guy on Ebay for cheap. It was never used. The
seller has/had quite a lot of them. They must have been stored
somewhere for years. Anyway, it works.

> > Also, I've read somewhere that you can enable the four top right
> > buttons as midi controllers instead of using them for switching top
> > encoder banks. How do I do this with no editor available for OS X and
> > no possibility to do it on the hardware directly?
> 
> I have no idea. (In BC Manager it's a piece of cake...)
> In any case the operation mode for the "Encoder groups" buttons is
> included in each preset definition, so if you can send such a preset
> (in a Syx file) to the BCR, this operation mode should work as defined
> on your BCR.

So, basically, I take a preset sysex file, convert it back to a human
readably format with a utility and try to find and edit the definition?

I'll take a closer look at your midi implementation document.

Cheers,
Axl