Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi
> 
> positive and negative numbers in 14bits (or even 16bits) are the big
> failing in the BC for hardware synths.
> 
> See my document
>
http://f1.grp.yahoofs.com/v1/cOOASeEHUmTGzTyjWlc42bgk1Wqq6ipALau7vzYcU01\
> JNsTG7vHsA90TYu-W5Yj5nl4Kzm3APHSErJ8KNdaWKQ/Documentation/SecretBC.pdf
>
<http://f1.grp.yahoofs.com/v1/cOOASeEHUmTGzTyjWlc42bgk1Wqq6ipALau7vzYcU0\
> 1JNsTG7vHsA90TYu-W5Yj5nl4Kzm3APHSErJ8KNdaWKQ/Documentation/SecretBC.pdf>
> 
> to show you how to do it  with less than 14bit numbers.
> 
> So the short answer is no.
> You can have 2 encoders, one for +ve and the other -ve or you can make a
> positive number when you turn it one way (probabaly clockwise) and -ve
> when you turn it the other way.
> Neither a particularly good solution.
> 
> Royce
> 
> > > Can the BCR send the values 16284 (0x7f1c MSB/LSB) to 100 (0x0064),
> > ie
> > > via 0?
> > >
> > > So in effect 16284 to 16383 (0x7f1c to 0x7f7f) then 0 to 100
> > (0x0000
> > > to 0x0064)
> > >
> > > The various combos I've tried (with BC-Edit and BCFREdit) result in
> > > 100 to 16284 or that in reverse, 16284 to 100.
> > >
> > > Why?
> > >
> > > Because the parameter values on the Alesis Micron that have a - to
> > a +
> > > range map to these values! You can use two separate encoders; 0-100
> > > and 16284 to 16384 (giving +0 to +100 and -0 to -100 respectively).
> > > But it would be cool to do it with 1!
> > >
> > > Jim
> > >
> >
> > Hello to everyone...since i am new to this group (i bought a used
> > bcr2000 for my alesis micron) and i don't want to start a new
> > question,I just updated this question...Is there any progress?
> > Also if it is not possible i would appreciate an answer!
> > Thank you very much,
> > Sakis
> >
I tried to make a trick the past few months while i was trying to find
a way to control the alesis micron...I found out that it respondes to
a standar CC command but you have to push a button first containing the
nprn you yant to change...so with one encoder you can change the
parameter assigned to the latest pressed button...
...so i was looking for something easier,but thank you for your
reply...sorry for my bad English,
Sakis
PS ,the link is not working!