Bc2000 (for the BCF2000 & BCR2000)

Thank you for the quick reply, Royce.  However the link to Mark's 
document doesn't work - and it looks like the file isn't available in 
the Documentation section or on his web site.  If you know where I 
can find that, I'd appreciate it.  (I searched and couldn't find it.)

Also, I was thinking that maybe what I'm trying to do can be 
accomplished by having a piece of software in beween my BCR2000 and 
Nuendo.  I know there are lots of apps that will receive one MIDI 
message and in turn transmit something different.  Do you know if any 
(perhaps MidiOX?) allow you to store a value transmitted to it into a 
variable and then when another message is received (from a different 
button) it could send the value of the variable?

Thanks again,

Erich

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Erich
> 
> welcome
> 
> >I'm wondering if anyone knows if it's
> > possible for a button to send the value of an encoder (via 
tx "val" or
> > something).
> Do you mean you would like to resend the current value of say 
encoder 1
> by pressing the built in switc (Button 1)?
> As far as I know you can't access the values of the encoders or 
buttons
> or faders and resend them.
> Except you can send all the values - snapshot using <preset while
> holding EDIT
> 
> This would be a great feature as there are many synths with 'packed'
> data in their sysex.
> Korg DW6000, for example, has the Osc1 octave (buts 5 and 6) packed 
in
> the same byte as the VCA realease time (bits 0 to 4)
> I would love to change the Osc1 octave and add it to  VCA release 
time
> encoder value, but it can't be done as far as I know.
> 
> > I'm trying to make it so that after selecting the insert
> > plugin via Push Encoder 1 (from Mackie Control setup) I can push 
the
> > button part of the same encoder and make it pop open the selected
> > insert.  I can open the insert with a different button (via a 
bank of
> > 8), but it would be more tricked out if it was the same Push 
Encoder
> > I'm using to select the insert on the selected channel.
> 
> If you change the group you have a different button. Group 1 Button1
> becomes Group 2 Button9.
> 
> I'm not sure what messages you need, but if you can tell your DAW
> software that a particluar Midi message means a certain action then 
you
> can use one button to toggle 2 values.
> 
> Press 1  - CC100 val 45
> Press 2  - CC100 val 113
> 
> 
> Unfortunately you can't have a combination or buttons (Say, hold 
down
> EDIT and press Button1)  and get it to give out a different  Midi
> message.
> >
> > I was fascinated with Royce's document
> > (http://shoshin.110mb.com/genmce/bcr2000/files/SecretBC.pdf) on 
using
> > tx messages and was wondering what other commands are available.  
It
> > looks like the .rtf documents referred to in the tabs of bcreditor
> > aren't available.  If you know where I can find them, please let 
me
> know.
> 
> Mark's excellent pdf of the BC specification is in the files 
section.
> This has it all.
> If it's not in there then we are all unaware of it.
> 
> http://f1.grp.yahoofs.com/v1/YGmSSc-
eXxh6OS1jchAFoQlXlgJlcuWRM9uYPXohsPb\
> uuJaCqR0wGlPAtk2x-VsV1IaKhQoN10XNQJlhHqusEA/Documentation/BC%20MIDI%
20Im\
> plementation.txt
> <http://f1.grp.yahoofs.com/v1/YGmSSc-
eXxh6OS1jchAFoQlXlgJlcuWRM9uYPXohsP\
> buuJaCqR0wGlPAtk2x-VsV1IaKhQoN10XNQJlhHqusEA/Documentation/BC%
20MIDI%20I\
> mplementation.txt>
> 
> 
> Royce
>