Bc2000 (for the BCF2000 & BCR2000)

Hi Royce-

Sorry for the delay posting back  -- I've had no internet (or phone) for the past few days.:(

I'll give your suggestions a try and let you know how it goes.

Thanks very much!

-Susan

--- In bc2000@...m, "rpcfender" <rpcfender@...> wrote:
>
> Hi Susan
> sorry about the lack of  reply, but I thought that someone would be more
> knowledgeable about FL.
> 
> There are standard Midi messages for 'Play', 'Stop", 'Continue' (it fact
> there are a couple of ways to do it)
> Here is a good Midi site to explain them
> http://www.somascape.org/midi/tech/spec.html
> <http://www.somascape.org/midi/tech/spec.html>
> You should look at the System Real Time Messages for single byte message
> (the easiest)
> 
> If you need a more sophisticated way (ie harder) you should use MIDI
> Machine Control (MMC) Commands
> Use gloabal Id of $7F
> Play = $F0 $7F $7F $06 $02 $F7
> Stop = $F0 $7F $7F $06 $01 $F7
> 
> 
> All is possible with the BCR/BCF
> I don't know if FL reacts to System Real Time or MMC, but a simple test
> for System Real Time is Start = $FA and Stop = $FC
> Uses Mark's editor for the Buttons on the lower right side, 51 and 52,
> and use the Learn setting and just have $FA in the message
> 
> Hope this helps
> 
> Royce
> 
> > I asked this a few days ago in relation to FL Studio, but I didn't get
> any replies and now my question is a broader one anyway.
> >
> > I can control SONAR's transport with an excellent control surface
> written by a SONAR User, but it requires a .dll. I can also control it
> using ACT, but in this particular case I want to use a standard "all
> controls" BCR2000 preset. Is it possible to program the 4 User buttons
> as standard transport controls, if there is such a thing?
> >
> > I ask because I want to use a preset to control a plug-in that
> responds to CC messages, but I also want to control the transport
> without switching presets.
> >
> > Thanks-
> >
> > -Susan
> >
>