Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "nedaggg" <nedagg@...> wrote:
> Hello I use a lot of nrpn on generic remote , is it posible in BCManager  to copy and paste a knob increasing its CC/nrpn number by 01 ? Would be nice since you set up one knob the way you need it , and the others are created with this trick+01.

BC Manager doesn't allow this particular "complex paste" operation. However, you can achieve basically the same result as follows:

1. Select a range of encoders (e.g. 1-10).
2. From the Edit menu, perform Set->Type and choose NRPN.
3. From the Edit menu, perform Set->NRPN->NRPN, setting NRPN to the first desired value and "Step per row" to +1.
4. Set any other parameters (e.g. Value 1 and 2) in the same way.

Alternatively:
1. Set up encoder 1 completely (via the Encoder dialog box).
2. Copy encoder 1.
3. Select encoders 2-10. (Or possibly 1-10, since you're going to set the first selected encoder's NRPN value anyway in step 5 below; you then don't even have to set up encoder 1's NRPN value in step 1 above.)
4. Paste (this pastes encoder 1 to all the selected encoders).
5. Perform Set->NRPN->NRPN, again setting "Step per row" to +1.

Mark.