If you are using Windows you don't need huskervu and midiyoke.
In Windows XP you need to install the drivers from the Behringer site (USB MIDI DRIVER (V1.2.1.3) for BCF2000 & BCR2000 (94 KB)), in Windows Vista you don't need to install the drivers.
Also, make sure you have installed the latest firmware (BCF2000 Version 1.10 (70 KB) ) a start the unit in Mackie mode.
This works fine for me in Sonar and Ableton Live, in fact I find that Ableton Live is one of the best applications dealing with external controllers.
I hope this helps.
The downloads are at http://www.behringer.com/EN/Support/B-Control-Downloads.aspx
Good luck,
Marco
To: bc2000@yahoogroups.com
From: ashwinkumar_m@...
Date: Sat, 19 Sep 2009 04:11:51 +0000
Subject: [bc2000] badly needing help
Its been over a year since i got this BCF 2000 from dubai as direct dealership is not available in india. Since then my nightmare started. I havent used it at all for the past one year as i found the setting up difficult. and i dont have support here.
i have cubase sx3 and i want to use bcf 2000 atleast to control the cubase mixer so that i can do automation.
As instructed i have downloaded huskervu and midiyoke and installed it.
i have booted the bcf in mackie mcc mode and set up mackie control in cubase.
and setup goes like this
in cubase
mackie control
input: bcf2000 (01) to out: midiyoke 1
in huskervu input: midiyoke 1 to output bcf2000 (01)
but on starting a project in cubase the faders dont even respond.
can some one please help me in laymans terms on what i need to do to get this thing work on cubase sx3???
some help will be greatly appreciated as i have done a song with many midi and audio tracks badly waiting to be mixed and automated
please do help
i have cubase sx3 and i want to use bcf 2000 atleast to control the cubase mixer so that i can do automation.
As instructed i have downloaded huskervu and midiyoke and installed it.
i have booted the bcf in mackie mcc mode and set up mackie control in cubase.
and setup goes like this
in cubase
mackie control
input: bcf2000 (01) to out: midiyoke 1
in huskervu input: midiyoke 1 to output bcf2000 (01)
but on starting a project in cubase the faders dont even respond.
can some one please help me in laymans terms on what i need to do to get this thing work on cubase sx3???
some help will be greatly appreciated as i have done a song with many midi and audio tracks badly waiting to be mixed and automated
please do help
check out the rest of the Windows Live™. More than mail–Windows Live™ goes way beyond your inbox. More than messages