Bc2000 (for the BCF2000 & BCR2000)

Thanks for the rather rapid reply -
I've done all the buttons, the push functions, the 3 rotary encoders and 'fudged' it to send the 'knob touch' feature (or parameters dont adjust).
I've downloaded that Cubase file - i'll have another go at sorting that fader out over the weekend.

One of my problems was getting the syntax in the script correct - but i have also learn more about BC manager whilst doing this.

Aside from that its working - perhaps some tweaks to speed settings is needed here and there. (currently no fader but this funtion is permantently mapped to encoder one anyhow- so perhaps its no big deal)

A bit of tweaking perhaps to the layout and i'll upload it

Thanks


--- In bc2000@yahoogroups.com, "Denis Gerage " <nedagg@...> wrote:
>
> Try to goggle "generic remote" and "alphatrack" there is a guy who emulated the alphatrack using a maxpatch in bcr, in cubase.net forum you find it easy the post , I think there is a sysex file you can open it and search the trick inside
> 
> Hope it helps
> 
> Denis
> 
> 
> Sent from my BlackBerry® smartphone
> 
> -----Original Message-----
> From: fred <sputnikjonny@...>
> Date: Fri, 6 Nov 2009 00:42:18 
> To: <bc2000@...m>
> Subject: [bc2000] Script? help needed...
> 
>   
>  
>  
>  
> I need to set an encoder to transmit a 10 bit pitch bend.
>  
>  Its to emulate the 'alphatrack' controller. Its supported in REaper so i thought i would try to create a preset for it (BCR2000).
>  
>  The alpha tracks documentation says...
>  
>  Fader Move e0 yy zz
>  
>  Where yy is 3 LSB's in the from 00,10 .... 70
>  Where zz is 7 MSB's in the form 00,10, ... 7f
>  Together, yy and xx form a 10 bit fader position.
>  
>  I have tried writing this into the script - but im failing :(
>  I think i need to use the .tx command.
>  i've tried - it should be easy as i have found an example for pitch bend at 14 bit - but it needs to be ten bit.
>  I can't even upload the 14 bit example.
>  
>  Any help would be much appreciated.
>