Message
Re: MKS-70 Sysex Script
2009-12-31 by rpcfender
> I think this is it, need to get a PC and upload it and try it out.
> Programmed it with Filemaker, already had the sysex stuff databased.
> Toughest part was mapping out the controls to the available knobs.
> Used the buttons to increment the 4 step values. Would appreciate a
> quick check to see if I'm missing any bits.
$rev R1 ; for the BCR
$preset
.name 'MKS 70 Tone A'
.snapshot off
.request off
.egroups 4 ; make the top row of encoders into 4 rows - only used two though- then you should use
.egroups 2 ; and this will use just the top two buttons -
; so the top row will always be usefull otherwise you could press group3 button and ther top row would stop working
.fkeys on
.lock
.init ; clear the preset in the edit buffer
; The BC separates each line into a nice formatted code
$encoder 1
.showvalue on
.mode 1dot ; the mode word is missing
.resolution 96 96 96 96
.default 0
.minmax 0 127
.tx $F0 $41 $36 $07 $24 $20 $01 $2F val $F7 ; MKS 70 Tone A ENV-1 Attack
$button 47
.showvalue on
.mode incval 32 ;I don't think this is right - this says to jump by 32 each time the button is pressed
.default 1
.minmax 0 3
.tx $F0 $41 $36 $07 $24 $20 $01 $1A val $F7 ; MKS 70 Tone A DCO Dynamics
$end
Nearly there
Royce