Bc2000 (for the BCF2000 & BCR2000)

This is a great board. Thanks so much to you guys.

I'm going to do all my synths, this one is the hardest. I'll upload my  
templates when they are done.

Happy New Year.

Stublito

Quoting psionic11 <psionic11@...>:

> If I'm understanding Royce correctly, you still need to correct many  
>  of your buttons.  For example --
>
> $button 48
> .showvalue on
> .mode incval 32
> .default 1
> .minmax 0 3
> .tx $F0 $41 $36 $07 $24 $20 $01 $1B val $F7  ; MKS 70 Tone A DCO
> Env Mode <33,<65, <93, <127
>
> Firstly, the command ".mode incval 32" will make values jump by 32   
> at a time: 0, 32, 64, 96, 128=0 (wraps around), 32, 64, etc.  But as  
>  you've set ".default 1", then the values would jump 1, 33, 65, 97,   
> 129=1, 33...
>
> Secondly, as Royce has already pointed out, your ".minmax 0 3" will   
> only allow values 0, 1, 2, 3, then wrap back around.  Thus, you need  
>  to make it ".minmax 0 127" so that you can get the values needed by  
>  your MKS-70, that is ALL values up to 127.  Setting incval to jump   
> by 32 while only having minmax's max at 3 will not result in 0, 32,   
> 64, 96, 0, 32..., but instead in 0, 0, 0, 0..., because 3 is your   
> max.  Correct, Royce?
>
> Lastly, in your comments, you indicate that the MKS Env Modes are   
> <33, <65, <93, and <127.  Shouldn't that <93 instead be <97.  I'm   
> assuming the MKS is looking for 4 ranges to be switched thru, 32 per  
>  jump: 0-32, 33-64, 64-96, 97-127.
>
> Hope that's correct.
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>