Bc2000 (for the BCF2000 & BCR2000)

So I installed the Win driver on an XP laptop and tried uploading the  
script using the BC Editor, got an Er 22 - I'm assuming the generic  
newbie error ;)

I even tried the default Fantom Script same error.

Wassup?

Thanks again all,

Stublito


Quoting ogusa@...:

> Hopefully, not a dumb question. I couldn't find this in the available lit.
>
> Can the BC transmit the default values of the newly selected patch?
> This would be very useful for using the thing as a lighting controller
> or for synth programming when you want a basic synth patch to start
> programming ffrom.
>
> Thanks
>
> Stublito
>
> Quoting rpcfender <rpcfender@...>:
>
>>> If I'm understanding Royce correctly, you still need to correct many
>> of your buttons.  For example --
>>>
>>> $button 48
>>> .showvalue on
>>> .mode incval 32
>>> .default 1
>>> .minmax 0 3
>>> .tx $F0 $41 $36 $07 $24 $20 $01 $1B val $F7  ; MKS 70 Tone A DCO
>>> Env Mode <33,<65, <93, <127
>>
>> adding 32 gives
>> Env Mode <33,<65, <97, <129
>> but we can't have a data byte of  129
>> Are these the correct values??
>>
>>>
>>> Firstly, the command ".mode incval 32" will make values jump by 32 at
>> a time: 0, 32, 64, 96, 128=0 (wraps around), 32, 64, etc.  But as you've
>> set ".default 1", then the values would jump 1, 33, 65, 97, 129=1, 33...
>>
>> Not quite
>> You are correct when you say  ".mode incval 32" will make values jump by
>> 32 at a time
>>
>> .default 1 just means 'the first time this preset is selected after
>> power on the control will have the value 1'
>> After you have pressed or twisted the control the BC remembers the value
>> even if you change presets and come back again.
>>
>> When the BC loops back it always goes to the Min value
>> .minmax 0 127
>> 33
>> 65
>> 97
>> 00
>> 32
>> 64
>> 96
>> 00
>>
>> Although it started on 1 (default) it returns to the Min value. For 1 33
>> 65 97 you need...
>> .minmax 1 97        (I choose 97 because it tells me what the last value
>> is but 127 is OK)
>> 33
>> 65
>> 97
>> 01
>> 33
>> 65
>> 97
>> 01
>> 33
>> 65
>> 97
>>
>> Is you head hurting yet??
>>
>>
>>> Setting incval to jump by 32 while only having minmax's max at 3 will
>> not result in 0, 32, 64, 96, 0, 32..., but instead in 0, 0, 0, 0...,
>> because 3 is your max.  Correct, Royce?
>>
>> Absolutely
>>
>> All the best
>>
>> Royce
>>
>>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>