Bc2000 (for the BCF2000 & BCR2000)

Hi CU

> >
> Back when I was using my BCF under XP, I had no luck with the USB driver.  I had to use MIDI cables to get it work properly.
>

Try the Midi port first and if it still isn't fixed you might like to try this.

Quite often when a fault arises after a while or it fixes itself it can be due to the rise in temperature breaking/making contact on a plug or socket.

My guess is that the EEPROM inside the BC is a bit loose.

So if it is out of warranty and you are feeling game then I would open it up (I think there are some pictures in the files area to help).
Push down on the top of only chip in a socket (about half the size of a matchbox on the bottom case close to the back of the BC)

Push / wiggle any wired connectors on the inside of the BC while your at it.

Hope this helps

Royce