Bc2000 (for the BCF2000 & BCR2000)

Hi Mark and everyone else, of course....THX for your help!!

I now had the time to check the BCF's USB controller and i assume that this crappy thing was my problem.
I connected the BCF via MIDI only (on my old Steinberg Midex-3) and BOOM!!....it now works as i always wished it would do.

Also i tried to connect to the BCF using the BC manager (while still in USB mode): 
The connection worked when the BCF was "fresh-started" but not after the BCF "hang-up" etc. While "hang-up" BC Manager only showed an error message complaining about a driver/device not found etc.
Maybe all these problems come from the Behringer MIDI Driver i use (v 1.2.1.3)......perhaps i should try their new driver called BEHRINGER_MIDI_WIN32_1.0.10.zip

It would be nice if i could use the USB connection with a working driver again, because all my ports on the Midex-3 USB MIDI interface are in use and are only temporally switched to the BCF.

I think i should try this driver just to be 100% sure that it is a faulty BCF USB controller and not a driver etc.

Has anyone ever tried this "new" Behringer MIDI driver i mentioned above?

Also i maybe need an additional USB MIDI interface. Can anyone recommend a good working one?

CU

DonQ-Juz