It doesn't matter how low the latency on my sound
card is set (I've gone as low as 3 ms). I've run a test comparing the
nonmotorized faders on my kurzweil PC2X keyboard with the faders and rotaries on
my BCF2000, under identical circumstances. The faders on the PC2X are as
very responsive, leaving nothing to be desired as far as I can tell. The
faders and rotaries on the BCF2000's responsiveness is choppy as hell when
they're moved fast.
To be fair, I've tried using other motorized faders
on different units... they are similarly unresponsive (i tried a mixing board
with motorized faders at guitar center). I checked their setup, and their
latency was around 3 ms, so I know that this unresonsiveness is not arising due
to latency from the sound card. It seems to me like units with motorized
faders (and the pots too on my BCF2000) are inherently unresponsive, why I don't
know... probably engineering idiocy.
;
----- Original Message -----From: mczyzynskiSent: Tuesday, January 16, 2007 10:57 AMSubject: [bc2000] Re: faster pots response?--- In bc2000@yahoogroups.com, "the19thbear" ...> wrote:
>
> is it possible to hack the bcf2000 so the pots&faders will respond
> faster??
>
> thanks!
>
the bcf will respond as fast as you like, its all doen to your
soundcard latency. Mine is set to 5ms and the faders and knobs respond
immediately.
Check your latency.