Bc2000 (for the BCF2000 & BCR2000)

From My experience with midi yoke, first i'm using Fl Studio, I tried Midi yoke
on Win Xp and could not get it to work properly. So i switched to an alternative called Maple Midi Virtual Midi Cable. That did the Trick if you can't get midi-ox and midi yoke to work right.

It could of just been an incompatibility with FL Studio and midi Yoke but i wanted to share my experience with both programs. I Successfully got transport controls to work using the output messages or analyzer while pressing play with Fl Studio So if you can get Reaper to take to midi-ox then it will tell you what
hex value you need to send to Reaper.

Wanted to see if i could help! :)

Chris


--- In bc2000@yahoogroups.com, TOMMY SPAHLHOLZ <twostonemusic@...> wrote:
>
> Thanks I'll give midiox  & midiyoke a try and see what happens
> 
> 
> 
> 
> ________________________________
> From: Royce <rpcfender@...>
> To: bc2000@yahoogroups.com
> Sent: Fri, September 17, 2010 1:11:32 AM
> Subject: [bc2000] Re: Midi learn?
> 
> Â  
> Welcome
> 
> > My first post here and my question is.
> 
> > How to I get my BFC2000 midi learn to work with Reaper?
> 
> > I'm trying to get the 4 button below the pair of preset button to work as my 
> >transport button in Reaper.
> 
> Does Reaper put out Midi when you press the transport buttons??
> Can you use a Midi analyser to see what it is putting out?
> If you are using Windows try MidiOx and MidiYoke to find out.
> 
> All the best
> Royce
>