Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "Mark" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "gil.brand33" <gil.brand33@> wrote:
> > My synth(midi out) is connected to the BCR(midi in), and the BCR(midi out B) is connected to my synth(midi in) [BCR mode is S-3]
> > Also, my synth is configured to continuously send Sysex messages of all its knobs/parameters.
> > Sorry for my ignorance, but if that encoder is now configured to "deal" with Sysex messages, how come a change on the relevant synth knob has no impact on the BCR's encoder's value? 
> 
> The BCR's encoders and buttons only react to incoming MIDI messages relating to ".easypar" definitions, not to ".tx" definitions.
> See BCMI p. 49.
>


Thank you  v e r y  much Mark!
It all works smoothly. So much fan, and my PEK is powerful than ever!
I would like to backup my new BCR/BCF presets; They hold both regular configurations (CC) and special configurations (".tx").
If I dump the presets to SysEx files, would ALL information be saved (including ".tx") so that these presets can be fully recovered from my PC?

Cheers,
Gil