Bc2000 (for the BCF2000 & BCR2000)

Alex schrieb:
> I have some doubts about 3 parameters that use 14-bit MIDI CC
> messages.

> 1. The manual says the range for these parameters is 0-127. Why don't it
> say 0-16384?

Probably because the range for each single CC is only 0-127. Both the
values from the MSB and LSB controllers combined make up the full range.

> 2. If I want to control one of these parameters with my BCR2000 in only
> one encoder, can I achieve it assigning a NRPN in Absolute (14 bits)
> mode, is that simple? e.g. NRPN# 19 for Cutoff?

No, you use CC mode, set the CC number to the one of the MSB controller
and set controller mode (encoder 6) to "Absolute 14-Bit". The BCR should
then automatically know it needs to send the MSB and LSB controller
commands together for each value change.

NRPNs are a totally different beast.


Chris