Bc2000 (for the BCF2000 & BCR2000)

Nope! After 1 day of working we are back to square 1 again. Or more square 0 in this case because now it's not working anymore at all. BC Manager doesn't find it, Ableton gets incoming Midi messages but doesn't transmit any to it, nor does MidiOX.

I am out of ideas here. Is it defective?



--- In bc2000@yahoogroups.com, "leckmichunten" <leckmichunten@...> wrote:
>
> Wohoo I seem to have it sorted out.
> The cause is...
> 
> Drumroll...
> 
> THE FREAKING USB CABLE IT CAME WITH!
> 
> 
> After changing the cable it seems to work fine now and keeps doing so after a reboot. I can't possibly imagine how the cable would cause it to work properly after a fresh install, but not anymore after rebooting, but whatever.
> 
> At least it works now with a new cable. If anybody has weird issues with his BCR, change the cable first... Might save you from a lot of grey hair.
> 
> 
> 
>  
> 
> --- In bc2000@yahoogroups.com, "leckmichunten" <leckmichunten@> wrote:
> >
> > Hi,
> > 
> > I have spent the last 2 days trying to get my BCR2000 to work, but have serious issues each time I restart my computer.
> > 
> > My BCR will only work properly, whenever I unplug it from USB, delete it in the device manager, reboot and plug it in again and the driver gets reinstalled. Everything seems fine then.
> > 
> > But as soon as I restart my PC, multiple things will not work correctly. Ableton Live will receive Midi data from the BCR, but the BCR will not update it's encoder values when I do changes in Live. If I try to use MidiOX and send SysEx to the BCR, the display will not start rotating like it uses to. The transfer stops after a while with the error message: SysEx: No Buffers Available.
> > BC Manager will not find the BCR at all. Trying to do a SysEx transfer results in an error too: Not enough memory available.
> > 
> > If I reboot now, and uninstall it, plug the BCR in again, the driver gets reinstalled and it will work fine again. BC Manager finds the BCR, I can transfer SysEx data to it with MidiOX and encoder values will be updated with changes via mouse in Live.
> > 
> > I have read probably hundreds of threads here and in other forums to find users with similar problems, but nothing really helped.
> > 
> > I am on Windows 7 64bit, using the Behringer driver for 64bit. My BCR is in mode U1 and connected via USB. I have tried switching the USB port and tons of other things but it stays the same. And I am out of ideas... What is going on with my BCR? I am even considering it's defective, although it's new and works fine after the fresh install.
> > 
> > Any help is appreciated. Thank you!
> >
>