Bc2000 (for the BCF2000 & BCR2000)

I think you need to use a stand-alone mode since you're transmitting MIDI trough your MIDI interface. See chapter 4 in the BCF Manual.


--- In bc2000@yahoogroups.com, "John" <dallapicolla@...> wrote:
>
> You're lucky.... I used the very same driver without success.
> 
> But, I also am having no luck with BC Manager seeing my BCF unit via midi....
> 
> so I don't know what might be going on.
> 
> My computer is flawless with Cubase and everything to do with sequencing.
> 
> I am using midi from my RME HDSP audio card......
> 
> 
> 
> --- In bc2000@yahoogroups.com, "jeroenkanters" <j.kanters1@> wrote:
> >
> > 
> > 
> > --- In bc2000@yahoogroups.com, "John" <dallapicolla@> wrote:
> > >
> > > I never was able to install the driver for 64 bit on my W7 computer.
> > > Always got the "installation failed....timed out" error.
> > > 
> > > I had the BCF in USB-3 mode.
> > > 
> > > Thoughts?
> > >
> > What a coincedence, today I succesfully installed my BCF drivers (due to a reinstalled computer), windows 7, 64 bit and also in USB 3 Mode.
> > 
> > Just used the BEHRINGER_MIDI_X64_1.0.10.zip from http://www.behringer.com/EN/Products/BCF2000-WH.aspx and no problems.
> >
>