Bc2000 (for the BCF2000 & BCR2000)

Steve's correct,

$button 1
  .showvalue on
  .minmax 0 127
  .mode incval 32
  .default 0
  .tx $B0 07 val

gives

$B0 07 32
$B0 07 64
$B0 07 96
$B0 07 00
$B0 07 32

val goes from 0 to 127 96+32=128 so you are back to 0

Royce

--- In bc2000@yahoogroups.com, sghookings@... wrote:
>
> 
> You _may_ be lucky here.
> 
> Your sequence is ++32 for each button press
> 
> 0, 32, 64, 96, 128 ... but 128 is effectively 0 iff the BCR overflows.
> 
> You could check what a simple button with inc val 32 does as you try to push it past 96.
> If that works, then you would need to use Royce or Mark's software to encode the sysex and assign to a button, but only use the bottom  bits of of the val.
> 
> Pretty sure there are examples in Mark's manual (pretty sure I lifted heavily from this excellent resource when I made miniak presets).
> 
> Else, if the button doesnt overflow, you might consider using two buttons "paired" ... one for the up, one for the down.
> 
> Hope this helps.
> 
> Regards
> 
> Steve H
> 
> --- In bc2000@yahoogroups.com, "mz82003" <mz82003@> wrote:
> >
> > I want to program a button so that the BCR sends out a sysex chain containing a variable value where :
> > - val = 00 when the button is pressed once
> > - val = 32 when the button is pressed once more
> > - val = 64 when the button is pressed once more
> > - val = 96 when the button is pressed once more
> > - val = 00 when the button is pressed once more
> > and so on,
> > 
> > so that I could toggle e.g. between the waveforms of DCO1 and DCO2 or between the ranges of DCO1 and DCO2 of my JX-8P without having to use up a rotary encoder for that purpose.
> > 
> > Is that possible?
> >
>