Bc2000 (for the BCF2000 & BCR2000)

Hi Steve,

This is interesting. So you basically built yourself a MIDI-filter from an Arduino? I'm also playing around with Arduino from time to time. Does the Code you posted the last time work well? Could you give me the schematic/pin assignment of the arduino for this code? I might try building that MIDI-filter and then plug it in between the keyboard and the BCN44. Maybe a bare programmed AtMega328 with the crystal, capacitors and midi-ports then also suffices then for the filter?

Thanks,
electron

--- In bc2000@yahoogroups.com, sghookings@... wrote:
>
> Yes and no.
> 
> I did get the stuttering ... but it was because I had a flaw in my handling of real-time messages. Once I dealt with this all was well.
> 
> So my point (which someone else has also said they were going to use midi-merger to solve) is IF you are running into a limitation of the BCN44, then you could make a small "corrector" device for a few Euro's to work around it.
> 
> Thanks
> 
> Steve H
> 
> --- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@> wrote:
> >
> > --- In bc2000@yahoogroups.com, sghookings@ wrote:
> > > Simply to say without my hardware I couldnt reliably use the Yamaha but with the message filter I can use it with BCR.
> > 
> > So the BCF and BCR exhibit the same behavior (stuttering etc.) as the BCN44 when there is merging involved?
> > 
> > Regards,
> > Mark.
> >
>