Bc2000 (for the BCF2000 & BCR2000)

No, that's exactly what I try. I program P1: EG1 for piano and save it. Then P1 EG2 for guitar and when I save it EG 1, 2, 3 and 4 now has only guitar... It just makes no sence.

If I can solve this any other way I will have a look at Mark's software. Thanks for trying!

--- In bc2000@...m, sghookings@... wrote:
>
> OK the save saves what is in the memory at the time of saving.
> 
> If there is already contents in there, the save will save that.
> And keep saving it.
> 
> It may be that the reset makes 4 copies (Ich weiss nicht) but one way ahead might be to test ... what happens if you change the encoder groups of a given preset ... does the save record the new state?
> 
> If it does, then what difference does it make what the control does so long as the ones you programmed work.
> 
> Take Miniak.
> I have programmed 
> P1: EG1 for Osc 1
> P1: EG2 for Osc 2
> P1: EG3 for Osc 3
> P1: EG4 for voice params.
> 
> P1 == preset 1
> EGn == encoder group n (1 .. 4)
> 
> Now, in my case some of the buttons do nothing.
> For me I used Mark's software with Bryce's tips ... and the blank ones have an empty space in the configuration.
> 
> The who system is then backed up to sysex, and stored in my webpage, on my home PC, and in the files section.
> It has been used successfully by others, so I can easily put my BCR (or another one incase it breaks) back to the config.
> 
> There are a couple of videos on how to use Mark's software in the links / files section.
> 
> If you have a PC, and USB cable, this may be a really good way to do it.
> 
> Regards
> 
> Steve H
> 
> --- In bc2000@yahoogroups.com, "jacobsthlm" <jacobsthlm@> wrote:
> >
> > Seems it can't be a difficult question to answer or find out myself but I can't get it to work even after reading about it. 
> > 
> > When I programed Preset 1, Encouter Group 1 using the two lanes of buttons at the top (or almost at the top) and the press store twice Preset 1 is saved, but all the 4 groups saves with the same settings and not just Encounter Group 1. 
> > 
> > How do I save only 1 of all 4 Encounter Groups? I tried to press "Store" and then press the Encounter Group 1 button and then "Store" again but that didn't help...
> > 
> > Regards
> > Jacob
> >
>