Synth-DIY Yahoo! Groups Archives

Assuming you are using the BCR in USB mode, that is you have connected a USB lead between the BCR and your PC, then the green USB mode light is permanently lit on the BCR.

When MIDI parameter change data is received by the TX it will show the parameter changes on its LCD display. There is no other indication of MIDI data reception on the TX.

To: bc2000@yahoogroups.com
From: bc2000@yahoogroups.com
Date: Tue, 1 Mar 2016 07:56:30 -0500
Subject: Re: [bc2000] Re: New file uploaded to bc2000

Thanks for that, Jon

perhaps this is an additional thing you may be able to answer.?

should the BCR indicate via green LED that midi is transmitting?

as it is right now when i turn a knob, no LED lights to indicate midi leaving the BCR.

i do get a "midi data error" on the TX (when powering on the BCR) but the "play/perform" light never indicates any midi reception from the BCR. (it does however seem to indicate note data from my sequencer)

i guess my question is does the TX indicate midi sysex via "play/perform" and does the BCR show an LED for midi thats being transmitted by its knobs?

i apologize in advance for the nebulous or informal wording methodology of my post. :D

On Tue, Mar 1, 2016 at 7:06 AM, jon morgan jon@... [bc2000] <bc2000@yahoogroups.com> wrote:

Apologies - the download link is http://www.fm-alive.com/pages/dxm4.aspx

Just click the download button, then Agree to the legal stuff and DXM will install and run on your PC.

Jon

http://www.fm-alive.com

To: bc2000@yahoogroups.com
From: bc2000@yahoogroups.com
Date: Tue, 1 Mar 2016 12:06:01 +0100
Subject: Re: [bc2000] Re: New file uploaded to bc2000

Hi jon,

Thanks for the link, but is DX manager installable on PC?
I can't figure out how to do this.
The .Application extension doesn't seem to be recognized by W7.

Cheers

Le 29/02/2016 21:52, jon morgan jon@... [bc2000] a écrit :

Hi,

Thanks for the feedback.

How did you load the presets ? If it was with my DX manager app. then you should be able to see all the preset settings in its BCR editor.

You can download DXM from my site at http://www.fm-alive.com/pages/dxm.aspx.

There's help on setting up the BCR editor - just press F1 when it loads.

HTH

Jon

http://www.fm-alive.com

To: bc2000@yahoogroups.com
From: bc2000@yahoogroups.com
Date: Mon, 29 Feb 2016 10:41:17 -0800
Subject: [bc2000] Re: New file uploaded to bc2000

Hi there, Jon
first thanks for creating and posting such a helpful resource with the presets you uploaded.

ive been trying to get my BCR working with my TX81z but something just doesn't seem to be working.

when i have the bcr plugged into the TX81z it will give me a "midi data error" but never seems to control the unit after clearing the error.

i do have exclusive enabled and memory protect off.

i downloaded and installed your presets to my bcr and they all seem to be there but cannot figure out which one is for the TX81z.

is there any additional insight you could provide me in my quest?

thanks again and all the best!

Cet e-mail a été envoyé depuis un ordinateur protégé par Avast.
www.avast.com

Bc2000 (for the BCF2000 & BCR2000)

RE: [bc2000] Re: New file uploaded to bc2000

Attachments

Move to quarantaine