Bc2000 (for the BCF2000 & BCR2000)

Many thanks for the reply Royce!

I gave the Behringer Manual a read and it actually all made sense to me so I started experimenting with the "LEARN" function. I was thrilled at first as things seemed to be going well. I had previously mapped out where I wanted to put each parameter over 5 Presets to cover all the JX10 functions. I was motoring along with Preset #1, successfully assigning different Tone parameters to the rotary encoders, when suddenly the encoders seemed to get confused. Turning one encoder would affect the state of four other previously programmed encoders, and any of those four would control the parameter of the newly programmed encoder, (even though they had previously been assigned to different parameters). I turned the BCR off and started over, this time saving the preset as I went along with the programming, but before too long the same issue occurred again. I've given up for tonight but will have back at it with your suggestions tomorrow. 

Cheers,
James