Bc2000 (for the BCF2000 & BCR2000)

Hi,

Thanks Royce!

I've been trying to find this out. So it is possible to save different states on the BCR/BCF and recall them as if they are different sysex patches. For my ancient MKS 7!

I have an editor for the iPad Lemur. But after loading a patch you have to nudge each control individually to send the patch data. I need a quick, and complete sysex dump.

Hopefully I've found a solution here.'

Cheers,

Sarmad 








> On 23 Sep 2016, at 00:07, rpcfender@... [bc2000] <bc2000@yahoogroups.com> wrote:
> 
> Yes. You can set it up in the preset so when you change to that preset the current / default values are sent to the synth.
> 
> You can also send all the current BC values at any time to the synth by holding the EDIT button then pressing the < (Preset down) button.
> 
> To set the BC to the patch you just selected on the synth usually requires a computer between the BC and the synth to unpack and translate the data.
> 
> All the best
> Royce
>