Message
Re: Firmware decoding ?
2007-11-09 by rpcfender
don't bother with the screws underneath.
Remove the 2 side panel screws on each side.
The plastic panels have a 'tongue' holding onto the inner case, so you need to push the panels forward (as I recall) to release them.
The cases look to have been created to mount them in a 19" rack with pieces of metal angle like their mixers.
There are screws that hold the rear (raised section) of the top panel onto the inside metalwork.
Remove these and the raised section can be moved out of the way.
The CPU board is underneath.
I have included some pics of the CPU board in the Photos section .