Message
Re: bcf &yamaha ls9
2007-11-16 by rpcfender
> i'm trying to remote controlling the mixer yamaha ls9-16ch,i'm using
> bcfeditor 0.04 by birdie but in LEARNED mode have seen just one
> variabile data $F0 $41 $36 $00 $24 $20 $01 $1C val $F7
> and yamaha sysex(fader 1024 step) have two $F0 $41 $36 $00 $24 $20 $01
> val#1 val#2 $F7
I'm a bit confused. I can't find the sysex message you use in the manual.
Yamaha manufacture's byte is $43
So it should start
$F0
$43 (Yamaha)
device_id (with varying top nibble eg $20 or $30 for machine id = 1)
$3E (digital mixer)
$12 (LS9)
data
.
.
$F7
I think you will need to say what the sysex message is that you are trying to send
eg Parameter change or Library Attribute or Library Edit
Perhaps give an example of the message
> someone know how to send 2 or more comand in the same time with one
> bcf's switch?
Yes this is possible. If you can supply the details of what commands you need then I'll try to help.
> Someone know how to do 25 fader groups then recal with external data
> control?
I'm not sure what you mean here. Are you talking about the "Fader Layers" of the LS9?
You should check the back of the LS9 manual to see what MIDI message you need to send to do this and then post it here and we'll try to sort it out.
All the best
Royce