Message
Re: bcf &yamaha ls9 #3
2007-11-20 by rpcfender
> i've try to put in the bcf your data and the system work but just from
> bcf to ls9 not viceversa.The bcf's midi setting is U4 or S4.
You have probably seen how the BCF/BCR responds to moving a control in programs like LIVE .
The BCF/BCR and Live are using CC values not sysex to do this.
I haven't been able to get the units to respond in the same way with sysex, sorry.
You might like to see if the faders respond to CC7 (volume), each having their own channel instead.
My FantomX responds to both a sysex message and CC7 for control of the mixer.
> i've not understood how to setting the button switch:
>
> F0 43 10 3E 12 01 01 5F 00 00 00 00 00 00 00 00 01 F7 cue ch01 on
> F0 43 10 3E 12 01 01 5F 00 00 00 00 00 00 00 00 00 F7 cue ch01 off
>
> F0 43 10 3E 12 01 01 5F 00 00 00 01 00 00 00 00 01 F7 cue ch02 on
> F0 43 10 3E 12 01 01 5F 00 00 00 01 00 00 00 00 00 F7 cue ch02 off
$button 33 ; left button first row
.showvalue on
.minmax 0 1 ;off = 0 on = 1
.mode toggle ;push/release = on, then push/release = off
.default 0 ; start with the button off
.tx $F0 $43 $10 $3E $12 $01 $00 $4E $00 $00 $00 $00 $00 $00 val $F7 $F0 $43 $10 $3E $12 $01 $00 $4E $00 $01 $00 $00 $00 $00 val $F7
On the first push it will put out
F0 43 10 3E 12 01 00 4E 00 00 00 00 00 00 00 00 01 F7
F0 43 10 3E 12 01 00 4E 00 01 00 00 00 00 00 00 01 F7
on the second push
F0 43 10 3E 12 01 00 4E 00 00 00 00 00 00 00 00 00 F7
F0 43 10 3E 12 01 00 4E 00 01 00 00 00 00 00 00 00 F7
Is this what you wanted to do?
>
> tk's
> Alessandro
>
> ps:sorry may bad english
We would all be in a lot of trouble if I used my Italian
All the best
Royce