Bc2000 (for the BCF2000 & BCR2000)

Hi Royce,
I'll use an midi cc to sysex converter(Bome's?) because i can't enable
use ls9's or other Yamaha mixer with midi cc.
I'd make one midi rmc (3 or 4 bcf2000) to control ls9(16
fader,16knobs(,48switch) or pm5d (24fader,24knobs(GAIN/ALT
LAYER/PAN),72switch CUE/SEL/ON-OFF).I'm making crazy to "flip" the aux
layer and fader layer always during the show.
 With your help I've understood how to do it, but, just the main mix
layer,I'm  I'm just one stage monitor engineer not one midi programmer.
 But I've one big problem now,the last! I'll try to illustrate it:
the mixers have 16 or 24 layers(aux1,aux2...aux24) plus main mix,i
need "something" who memorize the other layers data and make one data
dump to the bcf's when i push the "flip" switch(it is just one sysex
data). For ex. i viewing(?) the main mix faders and i need to see
"aux1 faders" press flip+cue-aux1 and then bcf show me aux1 fader
...switch off flip and the  fader come back to main mix position or go
to another aux select

The Yamaha studio manager editor don't send or receive  midi sysex
data and the Yamaha thru-box driver not compare if the mixer is not
connect to the Pc 

i hope the explain is correct.

Do you know if the bcf have some free memory inside ? do you think is
possible to do it? Do you know some software?

Tk's from Italy

Alessandro