Bc2000 (for the BCF2000 & BCR2000)

Francesco (and Royce) -

Attached are script and sysex followup files to my previous post. (Incidentally these presets are designed to make 4 banks of VPots on the BCR with *any* DAW that implements the MCU as a control surface.) They separate out the encoder code into .easypar statements followed by the required bank +/- data in .tx. Seems to me that Royce mentioned you could include *both* .tx and .easypar in an encoder; if I'm wrong, obviously this will not work (and the possibility of receiving return MIDI code adjusting the LED's seems out of the question).

32VPotsOverlay2 specifies .default 0; Overlay3 has all .default = 1; Overlay4, .default = 3.

Please let me know if any of these work. Royce, how do you see it? Do we need to give up on LED feedback? (Maybe better to have no display at all, and just track the values in the DAW?)

Royce, I'd also like to know whether all these parameters are necessary - especially .minmax when .easypar is present. Also, should .resolution be changed with relative-3 encoders? Should they be maybe .resolution 24 24 24 24 to ensure one "click" per increment/decrement (doesn't the BCF/R have 24 [or 32?] stops per rotation)? 

Thanks to both of you -

Art Hunkins

--- In bc2000@yahoogroups.com, Francesco Cecconi <goyya76@...> wrote:
>
> Hey i thought you were on holiday! thanks for your work - i thought the rel2s, reloffs etc should have been used to produce a relative controller - in the meantime:
> 
> -i noticed that the feedback messages for the Vpots are cc48-55, on channel 1, with the following values (linked to the graphical behaviour): 1-11 dot, 17-27 pan, 33-43 bar, 49-54 Q-style
> - i tried too to add notes in the .tx field to route the messages to the correct pages and it works
> - i'm having a look inside bcr 1.1firmware sysex...just to see if it's possible to recognize the strings related to MCU emulation (i'm not very optimistic) and especially the led beahviour (MCU has 11 leds, corrsponding to led 3-13 of the BCR) 
> 
> Take care, 
> Francesco
> 
> 
> ----- Messaggio originale -----
> Da: abhunkin <abhunkin@...>
> A: bc2000@yahoogroups.com
> Inviato: Mercoledì 28 novembre 2007, 18:37:25
> Oggetto: [bc2000] Re: BCR Sysex from DAW
> 
> Francesco,
> 
> As Royce stated (way back on August 18 - message 533),
> 
> Art's
> .easypar CC 1 16 0 127 relative-3
> can be had with
> .tx $B0 16 ifp 1 ifn $41
> 
> This is the.tx code I'm working with for your multiple VPot sysex - 
> but incorporating multiple page/bank -/+ messages at the beginning of 
> the .tx. The ifp/ifn options are wonderful with encoders.
> 
> Art Hunkins
> 
> --- In bc2000@yahoogroups. com, "goyya76" <goyya76@ > wrote:
> >
> > Hi Royce,
> > 
> > as you were saying the BCR seems to respond only to CC set up 
> > in .easypar - i could put the relative Vpot message (eg for Vpot1 
> CC 16 
> > ch 1, range 0-127, relative-3) but i don't know how to writethe .tx 
> > string inserting a relative value (if it's possible, of course)...
> > 
> > ciao,
> > 
> > Francesco
> >
> 
> 
> 
> 
> 
>       ___________________________________ 
> L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: http://it.docs.yahoo.com/nowyoucan.html
>

  ----- Original Message ----- 
  From: Francesco Cecconi 
  To: bc2000@yahoogroups.com 
  Sent: Wednesday, November 28, 2007 1:42 PM
  Subject: Re: [bc2000] Re: BCR Sysex from DAW



  Hey i thought you were on holiday! thanks for your work - i thought the rel2s, reloffs etc should have been used to produce a relative controller - in the meantime:

  -i noticed that the feedback messages for the Vpots are cc48-55, on channel 1, with the following values (linked to the graphical behaviour): 1-11 dot, 17-27 pan, 33-43 bar, 49-54 Q-style
  - i tried too to add notes in the .tx field to route the messages to the correct pages and it works
  - i'm having a look inside bcr 1.1firmware sysex...just to see if it's possible to recognize the strings related to MCU emulation (i'm not very optimistic) and especially the led beahviour (MCU has 11 leds, corrsponding to led 3-13 of the BCR) 

  Take care, 
  Francesco


  ----- Messaggio originale -----
  Da: abhunkin <abhunkin@...>
  A: bc2000@yahoogroups.com
  Inviato: Mercoledì 28 novembre 2007, 18:37:25
  Oggetto: [bc2000] Re: BCR Sysex from DAW


  Francesco,

  As Royce stated (way back on August 18 - message 533),

  Art's
  .easypar CC 1 16 0 127 relative-3
  can be had with
  .tx $B0 16 ifp 1 ifn $41

  This is the.tx code I'm working with for your multiple VPot sysex - 
  but incorporating multiple page/bank -/+ messages at the beginning of 
  the .tx. The ifp/ifn options are wonderful with encoders.

  Art Hunkins

  --- In bc2000@yahoogroups. com, "goyya76" <goyya76@... > wrote:
  >
  > Hi Royce,
  > 
  > as you were saying the BCR seems to respond only to CC set up 
  > in ..easypar - i could put the relative Vpot message (eg for Vpot1 
  CC 16 
  > ch 1, range 0-127, relative-3) but i don't know how to writethe .tx 
  > string inserting a relative value (if it's possible, of course)...
  > 
  > ciao,
  > 
  > Francesco
  >







------------------------------------------------------------------------------

------------------------------------------------------------------------------
  L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail