Message
Re: The Maker Evolver Editor version 0.1
2007-12-17 by rpcfender
>
> The sysex file still gives one error at the start of transmission. If you know what I did
> wrong there please let me know...
There is a missing ' in the name but that won't cause the error
$preset stuff
.name 'DSI Evolver ;
should be
.name 'DSI Evolver '
.fkeys oncut
should be
.fkeys on
$encoder 54
.showvalue on er
the er shouldn't be here
If you use the latest version of the editor, when you send the preset and there is an error, a button next to the SEND appears.
Click this "Read Errors" button and a list of errors will display.
Double Click on the error line and you will be taken back to the editor at the line that the error occured.
>
> Don't rush to the file section right away cause iI'd like to ask a question about my BCR:
>
> Some encoders don't seem to lock to a value. when you fine tune something it sometimes
> spits out a value 1 above or below the value you selected. Especially with selectig for
> example routing destinations this can be a pain in the ass....
>
> Is this behaviour normal or is my unit malfunctioning? (by the way I use lots of ranges that
> are not 0-127 could be tricky....)
You have set the resolution to the same value for all turning speeds
try
.resolution 25 48 96 96
Turning it really slowly will only change the value by 25 in a full turn
Turning it slowly will change the value by 48 (half he 96) in a full turn
etc
Pity I don't have a n Evolver, looks great, well done.
Royce