Message
Re: BC2000 Wiki / Editing the preset buttons
2007-12-18 by rpcfender
It turns out it didn't work fully, I got the system buttons working OK, sending CCs, but the preset keys don't send a CC at all.
Here's the main part of my preset, not including the other encoders & buttons:
This works fine for me. The buttons put on channel 3 CC $71 or $72 with a 'down' value of $7f and a release of 0
Check that you haven't redefined them lather in the preset. The BCR is happy to redefine the button over and over again in the one preset. This usually happens when you cut and paste and forget to change the button number.
You could try just this snippet and if it works how you want it to then it will definitely be a redefinition.
You haven't defined $preset after the buttons. The .init will clear your settings.
Again the BCR is happy to have any number of $preset sections and it will clear everything that has gone before.
Other than that, it looks good.
$rev R1
$preset
.name 'TRAKTOR (P2) '
.snapshot off
.request off
.egroups 4
.fkeys off
.lock on
.init
$button 63
.easypar CC 3 113 127 0 toggleoff
.showvalue on
$button 64
.easypar CC 3 114 127 0 toggleoff
.showvalue on
$end
All the best
Royec