Bc2000 (for the BCF2000 & BCR2000)

Forget this. 
I have just checked the version of the editor you guys have and it
doesn't work.
I'll get a version to you as soon as I can.
Sorry.

Royce

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> Hi Ryan
> 
> on my editor go to the "Editor" tab, then the "Save & Get" tab and look
> for the area called "Sysex Header Bytes"
> Normally this is set to the Universal setting and for people with just
> one machine it is fine. You will need to select  the BCF or BCR. There
> is a device ID selection underneath if you need it.
> 
> I haven't been able to check this except on my BCR. Let me know how you
> get on.
> 
> Royce
> 
> --- In bc2000@yahoogroups.com, "k0mp0" <k0mp0ser@> wrote:
> >
> > Just to clarify what I meant here, my BCR and BCF are linked together
> > via MIDI cables with the BCF hooked to the PC via USB, so Royce's
> > editor, whenever it tries to refresh or send, receives from both units
> > at the same time, rending the MIDI in/output of the program useless to
> > me unless I turn off my BCR.
> >
> > Regards,
> > -Ryan
>