Bc2000 (for the BCF2000 & BCR2000)

Hi Royce,

> with .tx you can have quite a few MIDI messages so you don't really 
need
yes of course - i just keep on using it because as far as i have 
understood the button/encoder gets feedback only on .easypar...so 
actually i'm using both (telling this because maybe it could be 
interesting for someone):

- my BCR&BCF are routed through Usine, and from Usine to Cubase 
trhough midiyoke
- each .easypar is assigned in Cubase remote control panel (and 
feedback from the host is a nice feature...), the .tx messages are 
assigned to Usine functions (to switch the midi channel on which 
Usine passes the .easypar messages to Cubase)
- in this way with the same button i can open insert 1,2,...,8 of a 
track (Cubase) and aat the same time route the BCR messages (enc33-
enc56) on channel 1,...,8 using just one program (Cubase it's not 
able to "sense" the active insert, so i had to make a set of 24 CCs 
for each insert, with the same CCs on different channels)

at the beginning i used 8 bcr programs, but i was tired of passing 
from one to the other....

Take care,
Francesco ^_^