From: "bvs9000" <baronvonscratch@...>
To: <bc2000@yahoogroups.com>
Sent: Monday, March 20, 2006 9:09 AM
Subject: [bc2000] Re: Using BCR2000 To Control Kawai XD5
>I should have stated I am already using BC Edit and that I want to
> use it to learn the CC#s in question. How is that done?
>
> --- In bc2000@yahoogroups.com, "Erik Bowen" <erik.bowen@...> wrote:
>>
>> download "bc edit" software from the behringer website, on the
> BCF/BCR page. you can use that software to assign CC#'s to the
> dials/buttons on your BCR.
>>
>> As far as finding out which CC#'s to use for your particular
> synth/drum machine, i'd call tech support for you synth/drum machine
> if you can't find them listed anywhere
>> ----- Original Message -----
>> From: bvs9000
>> To: bc2000@yahoogroups.com
>> Sent: Sunday, March 19, 2006 9:41 AM
>> Subject: [bc2000] Using BCR2000 To Control Kawai XD5
>>
>>
>> Hello,
>> I've built a MIDI drum rig that consists of PC MIDI OUT > Yamaha
> DTXpress2 Kit MIDI OUT > BCR2000 MIDI OUT > [Kawai XD5 THRU >
> Digitech DSP128 THRU > Digitech DSP128], BCR2000 MIDI THRU >
> [Novation Drumstation MIDI THRU > MAM ADX1 MIDI OUT] > PC. I've also
> routed some of the individual drum sounds out to the DSP128s and
> other various effect units: 2x 2Way Crossover, 2x 15 band EQs, 2x
> Analog Delays, 2x Comp/Limiters, and an 11 band Vocoder. I'm using an
> RX1602 to mix the resulting signals down to a Stereo Output connected
> to my Master Mixer.
>>
>> I want to use BCR2000 to control XD5 parameters. XD5 drum sounds
> have synth-like parameters that can be adjusted with push-button and
> data slider methods, or via MIDI Control Change Numbers (CC#s) but I
> can't figure out how to assign those CC#s to the BCR knobs. XD5's
> manual shows a strange list of CC#s that doesn't show the parameters
> they are associated with. You can see it for yourself on page 53 of
> the PDF at http://www.kawaius-tsd.com/OM/MODULE%7E1/XD-5.PDF. Here's
> an example of the parameters I want to adjust: I want to adjust the
> decay of Kick Drum 1 with a BCR knob. If I set the BCR and XD5 to the
> same MIDI channel and assign CC# 75 every knob, nothing happens to
> the Decay of any drum sound.
>>
>> I need to know how to setup BCR to learn the correct CC# of each
> parameter, and how to get XD5 to transmit them. Will BCR be able to
> learn CC#s from XD5's push buttons and data slider? If learn doesn't
> work, is there another way to reveal the XD5 CC#s?
>>
>> Thank you,
>>
>> BVS
>>
>>
>>
>> SPONSORED LINKS Music instruments Electronic instrument
> Instrument music online store
>> Music instrument sale Bcf2000 Online music instrument
>>
>>
>> --------------------------------------------------------------------
> ----------
>> YAHOO! GROUPS LINKS
>>
>> a.. Visit your group "bc2000" on the web.
>>
>> b.. To unsubscribe from this group, send an email to:
>> bc2000-unsubscribe@yahoogroups.com
>>
>> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms
> of Service.
>>
>>
>> --------------------------------------------------------------------
> ----------
>>
>>
>>
>>
>> --------------------------------------------------------------------
> ----------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date:
> 3/17/2006
>>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.2.5/284 - Release Date: 3/17/2006
>
>
