I have never used the LEARN function before but I
just tried it and it seems to work fine.
Just put the BCR2000 in the USB U-3 mode. To load
sysex data I use MIDI-OX which
really is a fantastic piece of software. Place
the BCR2000[1] USB Midi IN/Out ports on top
of the
lists in Options > MIDI
Devices. Open the SysEx View and Scratchpad window
via
View > Sysex... From there you
can either load a sysex file or type in the sysex
string(s) directly.
I figured out that the maximum length of the
sysex data string is 62 characters.
Put the BCR2000 in the LEARN mode by simultaniously
pressing the LEARN button and
the button you want to load the sysex data to and
send the data via Command Window > Send Sysex
----- Original Message -----
Show quoted textHide quoted text
Sent: Wednesday, March 22, 2006 7:59
PM
Subject: [bc2000] Re: Where is System
Exclusive?
Thanks. Have you used BCR/F to send Sys-Ex strings and
variables?
Tell me how you set them up externally and got BCR/F to send
them.
--- In bc2000@yahoogroups.com, "DWLsys"
<;DWLsystems@...> wrote:
>
> I have not found this function
in the BC Edit program either. So at
this moment the only way to
>
load sysex data is to use the LEARN function. This is described in
chapter
4.3.1 of the manual.
> ----- Original Message -----
> From: bvs9000
> To:
bc2000@yahoogroups.com
> Sent: Wednesday, March 22, 2006
1:32 PM
> Subject: [bc2000] Where is System
Exclusive?
>
>
> In the ad for BCR, Behringer
says, "Those who prefer knobs over
faders
> will want
to check out the BCR2000, with 24 high-resolution
encoders
> that feature LED rings and an additional push function.
These
> illuminated buttons are assignable to various MIDI
functions
including
> note on/off, control change,
program change, MMC, and SysEx."
>
> I was told by
Kawai, "If this is true, then you should be able to
>
assign System Exclusive strings with a variable controlled by the
> knob/slider position to get at some of those XD5
parameters in
your
> list."
>
> I'm using BC Edit 0.2 beta 3 and I've gone through every
knob/button
> setting but I cannot find anything that
assigns System Exclusive
or
> variables.
> Please tell me how to create and assign a SysEx string
and
variable to
> one of the buttons 01-08 or
preferably 33-48 so I can then apply
that
> knowlege to
the others.
> Thanks
>
>
>;
>
>
> SPONSORED LINKS Music instruments
Electronic instrument
Instrument music online store
> Music instrument
sale Bcf2000 Online music instrument
>
>
>
--------------------------------------------------------------------
----------
>
YAHOO! GROUPS LINKS
>
> a.. Visit
your group "bc2000" on the web.
>
> b.. To unsubscribe from this group,
send an email to:
>
bc2000-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is
subject to the Yahoo! Terms
of Service.
>
>
>
--------------------------------------------------------------------
----------
>
