Bc2000 (for the BCF2000 & BCR2000)

Hi all,

I'm excited about the prospect of picking up a BCF2000.  But I have 
one major concern, and that is about it's SYSEX programming 
capabilities.

I own a DSI Evolver, which has very few assignable CC's, so it is 
primarily controlled remotely via SYSEX.  The box surface controls 
don't cut it for live tweaking of multiple parameters.  I bought an 
Edirol PCR board as a controller....it has extensive programming 
abilites.  In fact,  it has 4 different sysex modes which allow for 
the different methods of packing sysex data.

Unfortunately,  of those 4 modes, none of them are in the format that 
the Evolver knows.

I want to know what SYSEX programming capabilities the BCF2000 has 
available.  Does it have pre-set switchable modes like mentioned 
above,  and/or an ability to program it to be packaged a specific 
way.  ( more specifically the byte/bit size of the nibbles)

I've done a lot of searching and can't find the necessary material 
for this device to verify if it's capable.  Perhaps a PDF manual for 
the device and one for the new JAVA programmer are available??

If not,  is there anyone available here that knows how to program 
SYSEX well enough for me to tell them the format in which the Evolver 
recieves this data, and then verify if the BCF2000 is capable of 
producing it?

Thanks,

Robert