Bc2000 (for the BCF2000 & BCR2000)

The controllers are defined as the same controller.



--- In bc2000@yahoogroups.com, priatna suardi <priatnasuardi@...> wrote:
>
> hi all. thanks the moderator for let me join this groups,
> 
> i have a problem with the led indicator of each encoder, when i turn the
> most down left enconder, the other led is turning also, the third in
the row

> and the upper row,.
> 
> anyone experience this?? is this some kind of a hardware failure or
> software..thanks
> 
> -- 
> Best
> Komang Bgs Priatna Suardi
>

are you trying to answer or to ask a question




--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> The controllers are defined as the same controller.
> 
> 
> 
> --- In bc2000@yahoogroups.com, priatna suardi <priatnasuardi@> wrote:
> >
> > hi all. thanks the moderator for let me join this groups,
> > 
> > i have a problem with the led indicator of each encoder, when i
turn the

> > most down left enconder, the other led is turning also, the third in
> the row
> > and the upper row,.
> > 
> > anyone experience this?? is this some kind of a hardware failure or
> > software..thanks
> > 
> > -- 
> > Best
> > Komang Bgs Priatna Suardi
> >
>

--- In bc2000@yahoogroups.com, "priatnasuardi" <priatnasuardi@...> wrote:

> are you trying to answer or to ask a question

I think, he meant, that maybe the encoders are programmed with the
same controller value. In this case all these encoders would change
their LEDs, too.

I also experienced on one or two of my BCRs some kind of "ghost
lights". The encoders are programmed with different values. So I
assume, it may be caused by dust or something like that.