Cgs synth

--- In cgs_synth@yahoogroups.com, sasami@h... wrote:

>
> >> >i got an sh5 how got the mixer module all broken
> >> >what shoud i do.
> >> >try to make a modulard from theis beast ????
> >>
> >> Either modularize it (i've done it once - a lot of hard work) or

replace the

> >> mixer. It's a very simple circuit - just a collection of switches,

a few

> >> pots and an op-amp.
> >
> >i ve already modularize my tb 303 (The Borg mod.)
> >and ai getting use to it...
> >do you think i can (in and out) from some switch point
> >corect me if i am wrong.
>
> From the mixer switches, you can get yourself VCO 1,2 ring

and noise

> outputs. ALso from the mixer board you can get VCF, VCA and

bandpass inputs.

> This is not really worth modularising, as the switches do nearly

everything

> you could want.
>
> If you want to go deeper, there are many points in the circuits

than can be

> used as inputs and outputs so you can do a propper

conversion, but you

> really need the schematic diagrams to do it. Very little, if any,

extra

> circuitry is needed to do the conversion.
>
> Ken
> __________________

Ok so i will start to get the in and out from the mixer.
Do i have to add some resistor on it, or is it ok to do it straight.
Yes i have the shematics.

after taping the mixer wath do do you sugest me to move on
to ? lfo or...

and what woud be the worst part of doing this.
Tanks ;-)

Olivier
(french from montreal)
__________________________________________________
___

> Ken Stone sasami@h... or sasami@c...
> Modular Synth PCBs for sale

<http://www.blaze.net.au/~sasami/synth/>

> Australian Miniature Horses & Ponies

<http://www.blaze.net.au/~sasami/>