>On the MASTER divider and Gated comparator, yes. On the Pulse divider, no.
>I put the 1.5K between the led and trans. and a little over 6 volts
>(kept the 2.2K to ground). works great.
>
>Can I use a similiar technique to adjust the out levels of the gated
>comparator and pulse divider?
For the pulse divider, decrease the 100k resistor between the output and
ground to 1k, or 680R etc. For the inverter part of CGS36, add a 680 R
across the emitter-collector of the output transistor. The AND and OR gates
can easilly be adjusted by changing the values of the resistors already there.
Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>