Cgs synth

hmmm... perhaps i need to reread the text on the page ...either im oblivious
or blind

On 6/14/05, bbluthang <jumpswine@...> wrote:
>
> --- In cgs_synth@yahoogroups.com, "ed.j.wise" <dustin.sedlacek@g...>
> wrote:
> > how do you make a seq switch a sequencer ? i am cloudy on this
> anyone
> > have some tips or pics ? or other friendly info ?
>
> mine has +15V via 1k resistors fed to the switch pins of the 8 input
> jacks. then onto the inputs of 8 pots, the wipers go to the inputs
> on
> the PCB -
>
> (from Ken's explanation - "There are numerous ways this board can be
> used. For example, each input could be fed by a pot wired as a
> voltage
> divider, with it's input end normalized to +VE via a 1k resistor.
> This
> way you would be able to use the module as a sequencer when not
> using
> it as a switch." )
> i placed the pots after the jacks so i could also use them to set
> the
> input levels.
> this module makes an excellent sequencer - especially with the
> up/down, inhibit and reset controls.
>
> then you can feed cv signals to the inputs and patch the output to a
> vco - it gets interesting.
> or feed in audio signals for an analog sequential 'sampler'.
>
>
> a pic of my panel is here -
> http://www.sdiy.org/pinky/picture010.jpg
>
>
> andrew
>
>
>
>
>
>
>
> See the following URLS for the CGS Modular Synth home page:
> Main: http://www.cgs.synth.net/
> Secondary: http://otherunicorn.0catch.com/synth/
>
>
> ------------------------------
> *Yahoo! Groups Links*
>
> - To visit your group on the web, go to:
> http://groups.yahoo.com/group/cgs_synth/
> - To unsubscribe from this group, send an email to:
> cgs_synth-unsubscribe@yahoogroups.com<cgs_synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> - Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service <http://docs.yahoo.com/info/terms/>.
>
>


--
Dustin


[Non-text portions of this message have been removed]